How To Update Software Of Barco Base Unit?

Using the ClickShare Base Unit WebUI, download the latest firmware zip file. Unzip the zip file. Log into the ClickShare Configurator to update the firmware manually. You can update your firmware by going to Support & Updates. The Upload firmware button is located on the left side of the screen.

How Do I Update My Screen Firmware?

  • To access information, click the Advanced sub-menu.
  • Your computer and monitor should be connected to the USB cable.
  • Connect your PC/laptop to the internet, then click Update and wait for the upgrade process to complete.
  • How Do I Access My Clickshare Base Unit?

  • You will need to connect your Base Unit WiFi (or SSID)…
  • The password should be (default is clickshare).
  • You can enter 192.168.2.1 as your default IP address if you open the web browser (e.g. Google Chrome) on your laptop.
  • You will need to enter your login credentials, accept EULA, and click OK to access the site.
  • How Do I Reset My Clickshare Base Unit?

    You can reset the ClickShare Base Unit by pressing and holding the reset button with a paperclip. It takes up to one minute for the CX-50’s front LED to flash red-white after it has been reset. Connect the ClickShare’s power supply to the wall while holding the reset button.

    Should I Update My Monitor Firmware?

    Keeping your monitor updated with the latest firmware version is the best way to ensure the best performance and to resolve any issues you may have. You can update your monitor’s firmware at any time with the USB cable and firmware update tool.

    What Happens If I Update My Firmware?

    If you update your firmware, you will be able to upgrade your device with advanced operational instructions without having to upgrade the hardware. You will be able to explore new features that have been added to the device and have an enhanced user experience while interacting with it by updating the firmware.

    What Do I Do If My Phone Is Stuck On Firmware Update?

  • The device logo will appear on the screen after you hold down the Volume and Power buttons for a few seconds.
  • After a few seconds, press and hold the power button again to turn it on.
  • What Is Clickshare Base Unit?

    Barco’s ClickShare Base Unit, CSC-1, is a processing unit for ClickShare. In order to ensure that the wireless stream is reproduced correctly, it receives the Buttons’ wireless stream. If you are using two projectors, two screens, or a Double HD canvas, the Base Unit is a suitable device.

    How Do I Connect To Clickshare?

  • You can access Wi-Fi settings by going to Settings > Wi-Fi.
  • ClickShare Base Unit Wi-Fi network (or SSID) from the list: The default SSID to connect to the Base Unit is ‘ClickShare-*serial base number’.
  • The default password is clickshare. Enter the password here.
  • How Do I Find My Clickshare Ip Address?

    Clickshare units “Wireless IP” address can still be found by opening a web browser on your computer. You should see the wireless IP address displayed on the monitor you connected ClickShare to if you are unsure of its address.

    How Do I Reset My Barco Base Unit?

  • Set up the base unit.
  • The Barco logo will appear on the bottom side of the Base unit. Press the reset button until the LEDs blink red/white for at least 10 seconds.
  • By pressing the Restart button, the Base unit will restart with its default settings.
  • Why Isn’t My Clickshare Working?

    Please check the firmware version of the Base Unit or contact your local IT department if the ClickShare Button still does not connect after re-pairing. The Base Unit and Button must be updated with the latest firmware. The CS/CSE series, CX series, and C series are all supported.

    How Do I Reset My Clickshare Csc-1?

  • ClickShare is available via the web interface.
  • To access Configuration (2), click the Maintenance tab (1).
  • To return to factory defaults, click on Load Default Settings (3).
  • Watch how to update software of barco base unit Video